Environment-friendly CNC EDM Wire Cut Machine

Product information

Machine	Unit	MS-430F	MS-540F
Travel X,Y,Z	mm	400×320×400	500×400×400
Travel U,V	mm	±30	±30
Max. taper angle	°/mm	±6°/100	±6°/100
Diameter of wire	mm	0.12—0.20	0.12—0.20
Wire tension	N	10 - 30	10 - 30
Wire running speed	mm/s	1000 -12000	1000 - 12000
Max. cutting speed	mm2/min	≥150	≥150
Best surface finish	μm(Ra)	≤1.0	≤1.0
Repeat Positioning Accuracy	mm	0.005	0.005
Precision machining	mm	0.01	0.01
Machine dimension (W×D×H)	mm	1600×1650×1985	1700×1760×1985
Cabinet dimension (W×D×H)	mm	600×450×1700	600×450×1700
Weight total	Kg	2250	2550
Work tank
Max. workpiece dimension	mm	700×420×400	800×500×400
Max. workpiece weight	kg	1500	1800
Work table dimension (W×D)	mm	700×420	800×500
Electrical supplies
Standard	----	380V±10% / 50Hz / 2kVA
Other supply	----	200V / 415V
Room condition	----	15-30℃ / 40-80%
Dielectric unit
Filter accuracy	μm	10
Dielectric unit capacity	L	50
CNC System
CNC type	----	PC based controller, 80G, Hard disk, 15"LCD
Communication	----	RS232 , NIC, USB
Axis controlled	----	4 simultaneous
ISO code		Linear-circular-taper-4 axis program with G codes
Single pulse advancing accuracy	mm	0.001
Language	----	English-Chinese
Dimension	----	Metric-Inch

Machine	Unit	MS-650F	MS-860F
Travel X,Y,Z	mm	630×500×400	800×630×400
Travel U,V	mm	±30	±30
Max. taper angle	°/mm	±3°/200	±3°/200
Diameter of wire	mm	0.12—0.25	0.12—0.25
Wire tension	N	10 - 30	10 - 30
Wire running speed	mm/s	1000-12000	1000-12000
Max.cutting speed	mm2/min	≥200	≥200
Best surface finish	μm(Ra)	≤0.08	≤0.08
Precision machining	mm	±0.006	±0.006
Machine dimension(W×D×H)	mm	2000×1900×1800	2200×2100×1800
Cabinet dimension (W×D×H)	mm	600×450×1700	600×450×1700
Weight total	kg	2850	3550
Work tank
Max. workpiece dimension	mm	930×650×400	1100×800×400
Max. workpiece weight	kg	2200	2500
Work table dimension(W×D)	mm	930×650	1100×800
Electrical supplies
Standard power supply		3×380V ±10% ,50/60Hz
Power supply consumption		2kVA
Dielectric unit
Filter accuracy	μm	10
Dielectric unit capacity	L	50
CNC System
CNC type		PC based controller, 40G, Hard disk, 15″LCD
Communication		RS232, NIC ,USB
Axis controlled		4 simultaneous
ISO code		Linear-circular-taper-4 axis program with G codes
Single pulse advancing accuracy	mm	0.001
Language		English-Chinese
Dimension		Metric-Inch

The environment-friendly series CNC EDM wire cut machine uses layout mode of bed-type machine body and cross-type worktable, it is made up of machine body, worktable, wire running system, taper coil holder, electric control system, lubrication system, cooling system, protective cover, operating system, etc. Be able to process all the conductive objects, such as complex shape molds, cam wheels, ship machinery parts , automobile parts, aircraft parts, difficult to process tough objects and so on, can cut plane, bevel, and the top and bottom different shaped workpieces. It is of high performance and low cost, and has the following haracteristics:

The machine body adopts full support machining center mode worktable structure, optimal design strengthening ribs to Increase rigidity base on calculation of CAD simulating force.

The X,Y slide rails adopt Taiwan linear guide design, with good self-lubricating capability, reduce the static friction coefficient, and effective to overcome the mechanical "crawling", and ensure the machine with high precision under high load.

The X, Y axes movement with seamless high precision grade ball screw rotation, the ball screws were pre-stretched during installation, to enhance the driving rigidity, eliminate the error caused by thermal expansion, so as to ensure accuracy.

The protective cover is of semi-enclosed structure, with good appearance, dust proof, to ensure the product meet environmental requirements.

With waterproof guide pulley system, to effectively improve the idler pulley and bearing life.

The control system configures high-grade industrial grade host, industrial grade LCD display, HF series control software, specially developed non-resistance driving power supply and high sensitive ultra-precision micro discharge power supply.

Full-featured, reliable stable performance, simple operation will enable beginners to bring into play 80% of the machine performance, ensure to achieve cutting effect of low speed wire cutting EDM machine.

previous:CNC High Speed WEDM(DK7732/7740/7750/7763)
next:CNC High Speed Small Hole EDM Drilling Machine

search